PAT700 TOC Single Stream

PAT700110


The ANATEL PAT700 is a science and risk-based on-line TOC analyzer that simplifies the application of process analytical technology in life science water system applications. Designed as a fully compliant TOC analyzer that meets the requirements of USP <643> for TOC, USP<645> for conductivity, EP2.2.44 and JP XV<60>, the PAT700 enables process compliance in the most demanding regulatory environments. - Designed to Simplify Process Analytical Technology (PAT) in Pharmaceutical Operations - Moves TOC Analysis from the Laboratory to the Production Area - Enables Real-time, On-line Release for Pharmaceutical Water Systems

Specifications

Platform Anatel
Industry Standards USP <643> (including Sterile Water SST), EP <2.2.44>, 21 CFR Part 11
Calibration Intervals and Options 3-point TOC calibration; Conductivity calibration to USP<645>; System suitability to USP, EP and JP
Fluid Compatibility Purified water, Water for injection (WFI)
Online Operation Sample inlet pressure 10 to 100psi (0.69 to 6.89Bar)
Detection Differential conductivity
Reporting ppb TOC │ mS/cm
Installation Category II
Temperature Range 5°to 95°C sample range
Power Requirements 100/230VAC ± 10%, 65W, 50/60Hz
Operating System Paperless reporting via secure FTP over Ethernet
Resolution 0.1 ppb
Display Full-color LCD touch screen
Operating Modes Online TOC; Online Conductivity; Auto-switching Main and Standby UV lamps for 12 months operation │ 4-bottle auto-sampler for grab sample analysis │ Excursion capture for root cause analysis support
Weight 13.6 kg / 30 lb
Width 59.7 cm / 23.5 in
Depth 22.9 cm / 9 in
Height 25.4 cm / 10 in
Color Blue
Package Quantity 1

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.