HIAC 8011+ HRLD-150JA, 11171

8011+084


The HIAC™ 8011+084 is a liquid particle counting system designed for the real world. Easy to use with one-button sampling and results in under 60 seconds, the HIAC 8011+ system offers consistent, accurate fluid sampling from 1 cST to 425 cSt without dilution.

Specifications

Platform LPC Instruments
Performance ± 2.5% flow accuracy
Industry Standards ASTM D7619-12, Counts / mL, DEFSTAN 91-91, GOST 17216-2001, ISO 4406, NAS 1638, NAVAIR 01-1A-17, Raw Counts, SAE AS 4059
Light Source Light obscuration
Calibration Intervals and Options 6 month calibration: ISO-11171
Particle Size Analysis Range 1.3 - 150 µm(c)
Coincidence Loss 10%
Sample Volume 5 - 100 mL
Fluid Compatibility Akso Fyrquel™, Alcohols, Aldehydes, Aromatics, Diesel fuel, Esters, Ethers, Fuels, Jet fuel (JP4, JP5, & others), Kerosene, Ketones, MIL-H-5606, MIL-H-83282, Marston Bentley HW 540, Mineral oil, Mobile Zerol™ 150, Monsanto Coolanol™, Monsanto Skydrol™, Oil, Shell Tellis™, Stoddard Solvent, Water
Concentration Range 0 to 18000 particles/mL
Operating Range 0 to 90 psig maximum
Tare Volumes 0.1 to 100 mL
Data Storage 3,000 records
Reporting External printer, PDF, TSV
Pump Type Fluid degas vacuum (optional pump necessary)
Environmental Conditions For indoor use only, Maximum altitude: 2000 m
Installation Category II
Temperature Range Operating temperature range: 5°C to 40°C, Storage temperature range: -35 to +65°C 
Humidity Restrictions 10%-80% relative humidity (non-condensing)
Power Requirements 100-230 VAC, 50/60 Hz, 0.8 A maximum , With external air compressor: 5.2 A maximum , Optional pump: 100 VAC, 115 VAC, 50/60 Hz, 4.4 A maximum
Display 7" LCD
Operating Modes Bottle
Pollution Degree 2
Weight 26.4 kg / 58.2 lb
Width 38.2 cm / 15 in
Depth 40.8 cm / 16.1 in
Height 71.7 cm / 28.2 in
Color Gray
Package Quantity 1

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.